P0695 Hyundai Diagnostic Trouble Code
Detailed technical diagnosis, symptoms, common causes, inspection procedures, and estimated repair costs.
⚠️ Can I Drive With Code P0695?
Avoid aggressive driving. Have the vehicle diagnosed promptly with an OBD-II scanner to prevent secondary component damage.
🚨 Symptoms of Code P0695
- Check Engine Light (CEL / MIL) illuminated on dashboard
- Vehicle stored diagnostic trouble code in PCM memory
- Possible reduction in engine performance or fuel economy
- System operating under fail-safe or default backup parameters
🔍 Most Common Causes for Code P0695
- Faulty or degraded sensor related to computer & output circuits
- Damaged, corroded, or loose wiring harness connector
- Intermittent short circuit or open circuit to ground / reference voltage
- Software update required or internal controller calibration fault
🛠️ Step-by-Step Diagnostic & Multimeter Inspection Procedure
- Connect an OBD-II / EOBD scan tool and verify active and pending P0695 codes
- Inspect wiring harness and connector pins for corrosion, bent pins, or thermal damage
- Check circuit power and ground with a digital multimeter (DVOM)
- Review manufacturer Technical Service Bulletins (TSBs) for known vehicle issues
Common Diagnostic Mistake to Avoid: Replacing the sensor before verifying wiring harness continuity, supply voltage, and ground connection.
Frequently Asked Questions — P0695 DTC
What does OBD-II code P0695 mean?
Code P0695 stands for 'SAE Standard Generic Computer & Output Circuits DTC P0695'. It indicates an issue detected by the powertrain or control module within the Computer & Output Circuits.
Can I continue driving with code P0695 active?
Avoid aggressive driving. Have the vehicle diagnosed promptly with an OBD-II scanner to prevent secondary component damage.
What are the most common causes of code P0695?
The most frequent root causes include: Faulty or degraded sensor related to computer & output circuits, Damaged, corroded, or loose wiring harness connector, Intermittent short circuit or open circuit to ground / reference voltage.
How much does it typically cost to fix code P0695?
The average repair cost for code P0695 ranges from $65 – $420, depending on whether it requires a basic sensor replacement, wiring repair, or major mechanical component.