P0298 Audi Diagnostic Trouble Code
Detailed technical diagnosis, symptoms, common causes, inspection procedures, and estimated repair costs.
⚠️ Can I Drive With Code P0298?
Safe to drive to a repair shop or home, but arrange inspection soon to maintain optimal efficiency and pass emissions.
🚨 Symptoms of Code P0298
- Check Engine Light (CEL / MIL) illuminated on dashboard
- Vehicle stored diagnostic trouble code in PCM memory
- Possible reduction in engine performance or fuel economy
- System operating under fail-safe or default backup parameters
🔍 Most Common Causes for Code P0298
- Faulty or degraded sensor related to fuel and air metering (injector circuit)
- Damaged, corroded, or loose wiring harness connector
- Intermittent short circuit or open circuit to ground / reference voltage
- Software update required or internal controller calibration fault
🛠️ Step-by-Step Diagnostic & Multimeter Inspection Procedure
- Connect an OBD-II / EOBD scan tool and verify active and pending P0298 codes
- Inspect wiring harness and connector pins for corrosion, bent pins, or thermal damage
- Check circuit power and ground with a digital multimeter (DVOM)
- Review manufacturer Technical Service Bulletins (TSBs) for known vehicle issues
Common Diagnostic Mistake to Avoid: Replacing the sensor before verifying wiring harness continuity, supply voltage, and ground connection.
Frequently Asked Questions — P0298 DTC
What does OBD-II code P0298 mean?
Code P0298 stands for 'SAE Standard Generic Fuel and Air Metering (Injector Circuit) DTC P0298'. It indicates an issue detected by the powertrain or control module within the Fuel and Air Metering (Injector Circuit).
Can I continue driving with code P0298 active?
Safe to drive to a repair shop or home, but arrange inspection soon to maintain optimal efficiency and pass emissions.
What are the most common causes of code P0298?
The most frequent root causes include: Faulty or degraded sensor related to fuel and air metering (injector circuit), Damaged, corroded, or loose wiring harness connector, Intermittent short circuit or open circuit to ground / reference voltage.
How much does it typically cost to fix code P0298?
The average repair cost for code P0298 ranges from $65 – $420, depending on whether it requires a basic sensor replacement, wiring repair, or major mechanical component.